Top Line Parts' Jon Chabot, hotVWs’ tech master, will answer your various technical questions about your VW project, engine build, or anything related to VWs. We have many connections with experts in the VW industry!
To send a question, access below link!
https://hotvws.formstack.com/forms/techtalk
3 comments
Jon, I’m desperate … my ‘63 KG’s left rear axle is leaking trans lube through two new axle seal kits…one installed by a professional mechanic and one by me with help from a Haynes Manual. I was trying to find the actual source of the leak but there is so many brake parts in the small area that it’s almost impossible to locate a specific spot. are there any tricks or situations to check for to make a good install. I also had another question….I believe my pro mechanic put synthetic gear lube in the trans; is there a possibility that the seals won’t work with that type of lube? Kevin Kelley
Question for Tech Talk
Hello Jon,
If I use a 78mm crank, stock length rods, and 35mm compression height pistons will I end up with an acceptable deck height without increasing the width of the engine?
Thanks for sharing your knowledge,
Paul Stephan
Brook Park, Minnesota
I have a 1981 VW Vanagon camper, which needs a new AC compressor. Which compressors do you recommend?